Boise Water Heater Repair
A tree-lined street of craftsman homes with golden foothills behind (illustrative photo)

Water Heater Repair in West Valley, Boise

West Valley water heater failing, or thinking about tankless? Call or text now to hear what your own heater will cost before anyone starts.

  • Tankless gas-line checks
  • Answered nights and weekends
  • Price named before work begins

Water heater trouble?

Water heater trouble? Tell me what's going on, and I'll get right back to you.

* required

!Please enter your name.
!Please enter a 10-digit phone number.

Answered 24/7. Rather talk? Call or text (208) 248-9840.

Residents
about 27,890 (2019 estimate)
Single-unit homes
79%
Tank gas draw
about 40,000 BTU
Tankless gas draw
about 180,000 BTU

West Valley is one of Boise's biggest neighborhoods, with about four in five homes standing alone on their own lot. If a tank has failed or you want to compare tankless, call or text for a call right back.

A big neighborhood by the numbers

The City of Boise's 2020 neighborhood almanac lists about 27,890 residents in West Valley, from 2019 estimates, with 79% of housing in single-unit homes. Only a few associations are larger, and the housing here is varied enough that no one install style fits it.

Why tankless starts with the gas line

The City's installation guide gives two reference points. A typical 50-gallon gas tank draws about 40,000 BTU, and a typical tankless unit draws about 180,000. That is more than four times as much.

So when someone swaps a tank for tankless, the inspector re-checks gas line sizing. Depending on the house, the answer can be:

  • Existing line is enough: the simplest case.
  • Line needs upsizing: more pipe work, and a higher cost.
  • High delivery pressure: a medium-pressure regulator, required at 2 psi or higher.

The gas piping itself is a separate mechanical permit in Boise.

Tankless on your mind? Call or text now and ask what it would take.

(208) 248-9840Talk to a plumber 24/7Text Us

What else changes with tankless?

Beyond the gas line, tankless units bring their own checklist:

  • Venting: a new vent route, often through the wall or roof.
  • Electrical: a power connection for the controls.
  • Cost: about $1,600 to $4,500 installed, going by national averages, with permit, electrical work and removal adding a few hundred dollars more.
  • Rebate: Intermountain Gas lists $325 for a qualifying unit.

The tankless water heater cost guide breaks the numbers down.

Softener loops in newer houses

Idaho's plumbing code requires new one- and two-family homes built on a slab or with a finished basement to include a pre-plumbed water softener loop. If your West Valley house was built under that rule, a softener may already be plumbed in. If it was not, adding one later is a separate job.

Softeners shorten how long the anode rod lasts, so a house with one should have the rod checked more often.

Staying with a tank

A tank still costs less up front. Repair when one part fails, and replace when the tank leaks. See the tankless vs tank guide before deciding.

Questions to ask before switching to tankless

Bring this list to any tankless conversation:

  • Gas line: does it need upsizing for the higher draw?
  • Vent: where will the new exhaust run?
  • Upkeep: tankless units need descaling at least yearly, typically $110 to $275.
  • Lifespan: about 15 to 20 years, longer than a tank.

For a quick fix, see repair. For a full swap, see installation.

Questions homeowners ask

Will my West Valley gas line handle a tankless heater?

Not always. A tankless unit draws far more gas than a tank, so the line size is re-checked, and sometimes a heavier line or a regulator is needed.

What is a medium-pressure regulator and when is it needed?

It steps down higher-pressure gas before the appliance. The City's installation guide calls for one when gas is delivered at 2 psi or higher.

Does a new Idaho home have to be ready for a water softener?

New one- and two-family homes built on a slab or with a finished basement must have a pre-plumbed softener loop. That rule is for new construction, not older houses.

How long does a tank-to-tankless swap take?

Angi puts it at about 4 to 6 hours, against 1 to 3 hours for a tank swap. Gas line, venting and electrical work account for the difference.

Last updated:

Text Boise Water Heater Repair

Tell me what's going on with your water heater, and I'll get right back to you.

* required

!Please enter your name.
!Please enter a 10-digit phone number.

Rather talk? Call or text (208) 248-9840.